Overblog Follow this blog
Edit post Administration Create my blog
Welcome to Online Custumer Support Dirctory | Contactforservice

Welcome to Online Custumer Support Dirctory | Contactforservice

Call Customer Support if you would like our friendly agents to help you ... contactforservice.com

How to change the Replace Toner message in Brother Printer?

If you have just replaced the Toner on the toner Cartridge in the Brother Printer, and a ‘replace Toner’ or ‘toner low’ cautionary message still popping up, there is a simple solution to it. You might have tried several ways to fix the same, including taking the toner cartridge out, examining all is working well and that all the packing has been removed. You might have switched the printer off and back on again, but the message has not vanished. You might even have tried vibrating the cartridge from side to side, just in case. The user Manual is not much help in this condition, and the main issue is that even if you know the printer has a fresh toner cartridge, the printer rejects to print. You can also consult the experts at the brother customer support to get valuable suggestions to accomplish the task successfully.

You can relax now as we have some of the effective steps to help you in fixing the issue in an enhanced way. Resetting the ‘Toner Life End' or 'Replace Toner' message on the Brother HL Monochrome [black and white] printer:-

Steps to be followed

  • Firstly, open the front cover, and keep it open while you take the succeeding steps.


  • Now, switch off the printer.


  • Just hold down the ‘Start’ or ‘Go’ button while ‘turning on’ the printer. All of the panel lights should now be on.


  • Free the ‘Start’ or ‘Go’ button.


  • Now, click the ‘Start’ or ‘Go’ button two times.


  • Wait for a second. The section lights should all be ‘on’ again.


  • Now, click on the ‘Start’ or ‘Go’ button five times. At this point, the toner light should be turned off, although the ‘error’ may be blinking. The paper light should be ‘on’ or at least flashing at this point.


  • You are ready to close the cover, and the “Ready” light should be the only light that is now on.


  • Open the door, and then press on the ‘Clear/Back key.’


  • Now press ‘*00’


  • Next, press on ‘OK.’


  • When the drum replacement menu pops up, do not select anything for drum replacement, instead, press on ‘*’ and then 00, and then on ‘OK.’

If you follow the above steps, then you will be able to accomplish the task of resetting the Replace Toner message in Brother Printer. If you cannot do it or you are confused in fixing the issue yourself, there is another option for you. You can simply contact brother printer support for finding the solutions. You can even search the Internet for online web dictionaries which are reliable enough. Contactforservice is considered to be the finest of all and comprises the most authentic phone numbers of the famous brands and products for the users based in the US and Canada.


Share this post

Repost 0

Comment on this post